To Next Page
R
Richard SanchezAug 3, 2025
What to do if the CIRCLE FITNESS M8 Treadmill console display does not illuminate?
- VVictoria HolmesAug 3, 2025
If the CIRCLE FITNESS Treadmill console display doesn't light up, here's what to check: 1. **Power:** Ensure the on-off switch is activated and the indicator light is on. If not, inspect the AC power cord. 2. **Connections:** Verify all console wire connectors are correctly and completely connected, paying attention to outward connections and connector pin inserts. 3. **Overload:** Examine the fuse (near the on-off switch). If it's not working, replace it. If it is working, push it back and restart. If it works, proceed to maintain the running belt and deck. 4. **Power Source:** Turn off the power, open the motor cover, and turn the power back on. Check the console power pilot lamp (LED2) on the interface PCB. If it's not fully lit, replace it.
General
