2
READ ENTIRE PAGE BEFORE PROCEEDING
FOR SAFETY OF PERSONNEL AND TO PREVENT DAMAGE TO EQUIPMENT, THE FOLLOWING
NOMENCLATURE HAS BEEN USED IN THIS MANUAL:
DANGER
Failure to observe precautions noted in this box can result in severe bodily injury or loss
of life.
WARNING
Failure to observe precautions noted in this box can cause injury to personnel by
accidental contact with equipment or liquids. Protection should be provided by user to
prevent accidental contact.
CAUTION
ATTENTION
Failure to observe precautions noted in this box can cause damage or failure of
equipment.
Non compliance of safety
instructions identified by
the following symbol could
affect safety for persons:
Safety instructions where
electrical safety is
involved are identified by:
Safety instructions which
shall be considered for
reasons of safe operation of
the pump and/or protection
of the pump itself are
marked by the sign:
ATTENTION
CONTENTS
Safety and Table of Contents ................................................................................................. 2
General Instructions ................................................................................................................ 3
Introduction and Description .................................................................................................... 3
Pump Model Identification ....................................................................................................... 3
Ordering Instructions ............................................................................................................... 4
Operation … ............................................................................................................................ 4
Parts List … ............................................................................................................................. 5
Maintenance, Bearing & Seal Installation ................................................................................ 6
Disassembly and Assembly Instructions ................................................................................. 6
Trouble shooting ...................................................................................................................... 9
Field and Factory Service and Parts ............................................................................................. 9
Pump Assembly Drawings ............................................................................................... 10-18
ATTENTION
If operation of this pump is critical to your business, we strongly recommend
you keep a spare pump or major repair kit in stock at all times. As a minimum,
a minor repair kit (o-rings, gaskets, shaft seal and bearings) should be kept in
stock so pump refurbishment after internal inspection can be accomplished.
To Next Page
Loading...
Need help?
General
