Cisbo Parking sensor - Installation Guide: Rearview Mirror Type

INSTALLATION FOR REARVIEW MIRROR TYPE
1. This diagram only for 4 in 1
or 6 in 1 parking sensor
2. The back sensors begin to
work while the car on
reversing time.
3.the sensors will be on
flashing while the car on
brake time if the system be
matched the illuminant
sensor.
4. The function see detail
Page 15.
5. The display clip on the
original rearview mirror.
6.Power line guide:
Reversing light: Power on
while the car on reversing
Time.
Stop light: power on while
brake.
YELLOW 12v
Reversing
light
(Only for lliuminant sensor)
INSTALL ON THE
BACK BUMPER
BLACK GND
MAIN BOX
RED +12v
Stop
light
DISPLAY
4 SENSORS
2 SENSORS
TO CIGARETTE JACK +12V
SENSOR A
SENSOR D
SENSOR C
SENSOR B
MOBILE PHONE
CISBO RADER SYSTEM USER’S MANUAL