EasyManua.ls Logo

Cisco 1700 - Required Variables

Cisco 1700
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix B ROM Monitor
Disaster Recovery with TFTP Download
B-6
Cisco 1700 Series Router Software Configuration Guide
78-5407-03
Note The commands described in this section are case sensitive and must be entered
exactly as shown in the lists.
Required Variables
The following variables must be set with the commands shown before using the
tftpdnld command:
Optional Variables
The following variables can be set with the commands shown before using the
tftpdnld command:
Variable Command
IP address of the router. IP_ADDRESS= ip_address
Subnet mask of the router. IP_SUBNET_MASK= ip_address
IP address of the default gateway of the
router.
DEFAULT_GATEWAY= ip_address
IP address of the TFTP server from
which the software will be
downloaded.
TFTP_SERVER= ip_address
The name of the file that will be
downloaded to the router.
TFTP_FILE= filename
Variable Command
Whether or not the router performs a
checksum test on the downloaded
image:
1—Checksum test is performed.
0—No checksum test is performed.
TFTP_CHECKSUM=setting

Other manuals for Cisco 1700

Related product manuals