29
CLI: ok
Secure Web: Web Authentication Certificate not found (error). If you cannot
access management interface via HTTPS please reconfigure Virtual Interface.
License Agent: ok
(Cisco Controller)>
Step 6 If the controller passes the POST, the bootup script runs the Startup Wizard, which prompts
you for basic configuration information.
Welcome to the Cisco Wizard Configuration Tool
Use the '-' character to backup
System Name [Cisco_d9:16:24]:
Note The startup wizard runs the first time that you power on the controller. The second
time you power it on, the controller prompts you for a login ID and password.
Using the Startup Wizard
Before you can use the startup wizard, you must obtain the information discussed in the “Required
Tools and Information” section on page 9. Table 3 contains startup wizard information you can use
to configure your controller for basic operation.
Note The available options appear in brackets after each configuration parameter. The default value
appears in all uppercase letters.
Note If you enter an incorrect response, the controller provides you with an appropriate error
message such as invalid response, and returns to the wizard prompt.
To Next Page
Loading...
Need help?
General
