Need help?Do you have a question about the Cisco 3504 and is the answer not in the manual?
General| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11e, IEEE 802.11g, IEEE 802.11h, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11u, IEEE 802.11w, IEEE 802.1AX, IEEE 802.1Q, IEEE 802.3, IEEE 802.3u |
|---|---|
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Ethernet LAN (RJ-45) ports | 4 |
| LED indicators | Network, Status |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 0 - 95 % |
| Operating relative humidity (H-H) | 5 - 95 % |
| Security algorithms | 802.1x RADIUS, HTTPS, SNMP, SNMPv3, SSH, SSL/TLS, WEP, WPA, WPA2 |
| Web-based management | Yes |
Weight and Dimensions| Weight | 2000 g |
|---|---|
| Dimensions (WxDxH) | 214.3 x 215.9 x 43.94 mm |
Provides essential installation procedures and critical safety warnings to prevent injury and equipment damage.
Step-by-step instructions for safely unpacking and inspecting the wireless controller unit.
Lists the essential parameters required from the network administrator for initial controller setup.
Guides through the process of configuring the controller's management interface for network access and management.
Provides guidelines for selecting a suitable and secure physical location for mounting the controller.
Step-by-step instructions for attaching rubber feet and placing the controller on a flat surface.
Describes the process of powering on the controller and observing the bootup script and POST results.
To Next Page