To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst 9800-L Series and is the answer not in the manual?
General| Model | Cisco Catalyst 9800-L Series |
|---|---|
| Category | Controller |
| Throughput | 5 Gbps |
| Redundancy | Yes |
| Form Factor | Rack-mountable |
| Redundant Power Supply | Optional |
| Power Supply | Internal |
| Operating System | Cisco IOS XE |
| Maximum Clients | 2000 |
| Management | Cisco DNA Center, CLI, WebUI |
| Wireless Standard | 802.11ax |
| Management Port | RJ-45 |
| Operating Temperature | 0 to 40°C |
| Input Voltage | 100-240 VAC, 50/60 Hz |
| Ports | 4 x 10G SFP+ |
Provides a summary of key features and specifications for the controller.
Details the various hardware components of the Cisco Catalyst 9800-L Wireless Controller.
Describes the front panel layout and components of the controller.
Explains the meaning of different LED indicators on the controller's front panel.
Describes the rear panel layout and components of the controller.
Basic installation guidelines and critical safety warnings for site preparation.
Steps for safely unpacking and inspecting the controller upon arrival.
Lists all items included in the Cisco Catalyst 9800-L Wireless Controller package.
Details the necessary tools, information, and requirements for installation.
Guidance on selecting an appropriate and secure physical location for the controller.
Describes the various methods for physically mounting the controller.
Instructions for mounting the controller on a desktop or shelf using rubber feet.
Procedures for securely mounting the controller to a wall.
Steps for installing the controller into a standard 19-inch equipment rack.
Guides on connecting to the controller via its console port for initial setup.
Instructions for connecting the management Ethernet port for network access.
Information on how to install a physical security lock for the controller.
Provides an overview and description of the external power supply unit.
Lists essential guidelines and precautions for installing the power supply.
Step-by-step instructions for installing the AC power supply unit.
Explains how to locate the serial number of the power supply adapter.
Steps and prerequisites before powering on the controller for the first time.
Guides through the initial configuration process for the controller.
Explains the purpose and aspects of the management Ethernet interface.
Details the default configuration of the management Gigabit Ethernet interface.
Instructions on how to assign IP addresses and configure Ethernet interfaces.
Describes how to save the controller's running configuration to NVRAM.
Commands to verify the controller's initial configuration settings.
Procedures for safely powering down the controller to ensure proper shutdown.
Information regarding the controller's evaluation license and its usage period.
How to view the Universal Device Identifier (UDI) for license management.
Instructions on how to check the Cisco IOS license level of the controller.
Lists the physical dimensions and weight of the controller.
Details the operating and storage environmental requirements for the controller.
Provides detailed specifications for the controller's power supply and consumption.
