Cisco Catalyst 9800-L Series User Manual

Summary of Cisco Catalyst 9800-L Wireless Controller Features
Table 1: Cisco Catalyst 9800-L Wireless Controller Features
DescriptionFeature
One rack-unit (1RU)Chassis Height
5 GbpsThroughput
250Number of APs supported
5000Number of clients
supported
Intel Broadwell-NE DE—8-core, 2 GHzProcessor
• Control/Data Plane Memory—16GB DDR4
• Boot Flash—8MB
• Bulk Flash—32GB eMMC
Memory Options
2x 1GE CuRedundancy, Service Ports
2x 1G/2.5G/5G/10G Cu (or) 2x 1G/10G Fiber, 4x 1G/2.5G CuData Ports
–13° F to 158° F (–25° C to 70° C)Storage Temperature
32° F to 104° F (0° C to 40° C)
The maximum temperature is derated by 1.0° C for every 1000 ft
(305 m) of altitude above sea level.
Note
Operating Temperature
0% to 95% RH non-condensingStorage Humidity
10% to 95% RH non-condensingOperating Humidity
0 to 10,000 ft (3048m)Operational Altitude
110W single 12V output adapter (C9800-AC-110W)Power Adapter
Cisco Catalyst 9800-L Wireless Controller Hardware Installation Guide
2
Overview of Cisco Catalyst 9800-L Wireless Controller
Summary of Cisco Catalyst 9800-L Wireless Controller Features

Cisco Catalyst 9800-L Series Specifications

General

Model	Cisco Catalyst 9800-L Series
Category	Controller
Throughput	5 Gbps
Redundancy	Yes
Form Factor	Rack-mountable
Redundant Power Supply	Optional
Power Supply	Internal
Operating System	Cisco IOS XE
Maximum Clients	2000
Management	Cisco DNA Center, CLI, WebUI
Wireless Standard	802.11ax
Management Port	RJ-45
Operating Temperature	0 to 40°C
Input Voltage	100-240 VAC, 50/60 Hz
Ports	4 x 10G SFP+