To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst C9800-L and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Console Port | 1x RJ-45 |
| Throughput | 5 Gbps |
| Operating System | Cisco IOS XE |
| Rack Height | 1RU |
| Humidity | 5% to 95% non-condensing |
| Model | Cisco Catalyst C9800-L |
| Management Ports | 1 x 1G RJ-45 |
| USB Ports | 1 x USB 3.0 |
| Redundancy | N+1 |
| Wireless Standard | 802.11ax, 802.11ac |
| Power Supply | AC or DC |
| Input Voltage | 100-240 VAC |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
| Storage Temperature | -40°C to 70°C |
| Encryption | AES |
Provides a detailed table of features including chassis height, throughput, APs, supported clients, processor, memory, ports, and environmental specifications.
Details the various components of the controller, including front and rear panels, LEDs, and ports.
Provides a visual guide and numbering for the front panel components, detailing LEDs and ports.
Explains the meaning of different colors and states for System and Alarm LEDs on the front panel.
Identifies and describes the components on the rear panel, including power adapter and security slot.
Provides essential guidelines and safety warnings for installing the controller, covering environment and clearances.
Step-by-step procedure for safely unpacking and inspecting the Cisco Catalyst 9800-L Wireless Controller for damage.
Lists all the items included in the Cisco Catalyst 9800-L Wireless Controller package.
Lists the necessary tools, hardware, and information required before installing the controller.
Guidelines for selecting a secure and reliable physical location for installing the controller, considering airflow and access.
Describes various mounting options for the controller, including desktop, shelf, wall, and rack mounting.
Provides instructions for connecting the controller's console port using RJ-45 or Micro USB for initial configuration.
Details how to connect an Ethernet cable to the MGMT port for network management.
Explains how to install an optional Kensington security lock to secure the controller.
Describes the external 110W AC power supply adapter (C9800-AC-110W) and its specifications.
Provides guidelines for installing the power supply, emphasizing proper connection to avoid system disruption.
Step-by-step instructions for connecting the power cord and confirming the power supply status.
Instructs users on how to locate the serial number of the external power adapter for technical support.
Steps to ensure the controller is ready for power-up and what to expect during the automatic power-on process.
Guides through initial setup using CLI or Web UI, covering basic network and wireless configurations.
Explains the purpose and characteristics of the management Ethernet port (GigabitEthernet0) for network management tasks.
Instructions on how to save the running configuration to NVRAM to prevent data loss during reloads.
Lists Cisco IOS-XE commands to verify the system version, hardware, and configuration status.
Provides the recommended procedure for safely powering down the controller using the reload command.
Details the 90-day evaluation mode for unregistered wireless controllers and its implications.
How to use the 'show license udi' command to find the Universal Device Identifier for license management.
Explains how to check the current Cisco IOS license level using the 'show version' command.
Lists the physical dimensions (width, depth, height) and weight of the Cisco Catalyst 9800-L Wireless Controller.
Details the operating and storage temperature and humidity ranges for the controller.
Provides AC input voltage, frequency, maximum output power, and adapter details for the controller.
