Cisco 3200 Series - Removing the Antenna End Cap; CHAPTER 3 Replacing Cards in the Cisco ISR 3270 Rugged Enclosure; Card Replacement Process

REVIEW DRAFT—CISCO CONFIDENTIAL
Contents
iv
Book Title
OL-15983-01
Attaching Version 1 of the Wiring Card 2-13
Attaching the Version 2 of the Wiring Card 2-14
Reattaching the I/O End Cap 2-17
Reattaching the Antenna End Cap 2-19
Applying New I/O End Cap Function Labels 2-19
CHAPTER 3 Replacing Cards in the Cisco ISR 3270 Rugged Enclosure 3-1
Card Replacement Process 3-1
Disconnecting All Cables from the Enclosure 3-2
Removing the Antenna End Cap 3-2
Removing the I/O End Cap 3-4
Removing the Wiring Card 3-5
Removing the Card Stack 3-5
Replacing or Adding a New Card 3-7
Inserting the Card Stack into the Enclosure 3-7
Reattaching the Wiring Card 3-11
Adjusting the WMIC Jumper Settings 3-14
Reattaching the I/O End Cap 3-15
Reattaching the Antenna End Cap 3-16
Applying New I/O End Cap Function Labels 3-17
CHAPTER 4 Replacing the SFP Module 4-1
SFP Module Replacement Process 4-2
I NDEX