Cisco 5000 Series - Page 11

• Two hot-swappable power supply (PSUs) that support 1+1 redundancy under most conditions. Only
when the 930W DC supplies (NC5K-PDC-930W-FR and NC5K-PDC-930W-BK) are used, both the
PSUs must be inserted and operational in a non-redundant 2+0 mode.
• Different power supply units (PSUs) are available for different air flow configurations.
• Three hot-swappable fan modules that provide port side intake or port side exhaust cooling in 2+1
redundancy mode.
• A management, console, and the USB interface on fan side of the router.
Power Supply
The Cisco NCS 5064 chassis has slots for two 1+1 redundant power supplies. Power supply options need to
be configured with the base chassis. A minimum of one power supply is required for normal operation.
When 930W DC power supply (NC5K-PDC-930W-BK or NC5K-PDC-930W-FR) is used, redundancy is not
supported.
Caution
The following table lists the power supplies that are configurable with the Cisco NCS 5064 router.
Table 7: Power Supplies for the Cisco NCS 5064 router and Redundancy Support Matrix
2+0
Non-Redundant
Mode
1+1
Redundant
Mode
1+0
Non-Redundant
Mode
ColorPower SupplyPart Number
YesNoNoRedCisco NCS
5000 Power DC
930W Front to
Back Airflow
NC5K-PDC-930W-FR
YesNoNoBlueCisco NCS
5000 Power DC
930W Back to
Front Airflow
NC5K-PDC-930W-BK
NoYesYesRedCisco NCS
5000 Power AC
1200W Front to
Back Airflow
NC5K-PAC-1200W-FR
NoYesYesBlueCisco NCS
5000 Series
Router Power
AC 1200W
NC55-1200W-ACFW
NoYesYesWhiteCisco NCS
5000 Power
HVAC/DC
1200W
Bi-direcitonal
Airflow
NC5K-PUV-1200W
Overview
11
Overview
Cisco NCS 5064