To Next PageTo Next Page
Need help?Do you have a question about the Cisco Catalyst Express 500-24LC and is the answer not in the manual?
General| Model | Catalyst Express 500-24LC |
|---|---|
| Product Series | Catalyst Express 500 |
| Switching Capacity | 8.8 Gbps |
| Power over Ethernet (PoE) | No |
| Form Factor | Rack-mountable |
| Power Supply | Internal |
| Jumbo Frame Support | Yes |
| Manageable | Yes |
| MAC Address Table Size | 8K entries |
| Management | Web-based management, Cisco Network Assistant |
| Operating Temperature | 0 to 40 °C |
| Dimensions (H x W x D) | 1.73 x 17.5 x 11.9 in |
| Features | Quality of Service (QoS), VLAN support |
| Compliant Standards | IEEE 802.3, 802.1Q, 802.1p |
| Ports | 24 x 10/100 + 2 x combo Gigabit Ethernet SFP/Copper |
Covers initial configuration settings like network and IP assignment.
Provides guidelines and methods for physical installation of the switch.
Instructions on accessing and using the device manager interface.
Configures switch ports for optimal device connectivity and performance.
Manages user authentication and password protection for switch access.
Uses VLANs to segment network traffic and user groups.
Provides an overview of the main monitoring dashboard and its components.
Displays historical trends for bandwidth, port usage, and packet errors.
Performs system and link tests to identify and solve switch problems.
Restarts or resets the switch to factory defaults to resolve issues.
Updates the switch with the latest software changes and features.
Steps to resolve issues when a software upgrade fails or the switch does not restart.
Deletes all username-and-password pairs to recover access.
Recovers switch software if it becomes corrupted or is deleted.
