Chapter 5 Troubleshooting
Recover the Switch Software
5-10
User Guide for the Catalyst Express 500 Switches
OL-8122-01
4. Connect your management station directly to the switch port with a blinking
green port LED. The port LED turns solid green after the connection.
5. Open a web browser session, and display the device manager. The device
manager appears without requiring a username and password from you.
The Software Recovery window appears (Figure 5-4).
Figure 5-4 Software Recovery Window
From the Software Recovery window, you can choose:
Erase system configuration Use this option to delete all the configuration settings on the switch,
including the IP address, usernames, and passwords, but retain the
software image.
If you select this option, you must set up the switch again, as described
in the Getting Started Guide for the Catalyst Express 500 Switches.
To Next Page
Loading...
