3-5
User Guide for the Catalyst Express 500 Switches
OL-8122-01
Chapter 3 Customization
Optimize Ports through Smartports Port Roles
Figure 3-2 Smartports Window
Recommended Smartports Assignments
The recommended port role assignments (Table 3-2) depend on the switch model
and the port type. These assignments reflect the type of device connections
intended for the switch model. If you decide to use most of the switch ports with
their intended port roles, accept the recommended port roles, and change only the
ports that need a different port role.
Immediately after initial setup, you can choose to have the recommended port
roles applied to the ports. If you decline, the Other port role is applied to all ports.
92937
Table 3-2 Recommended Smartports Assignments
Switch Model Port Type and Number Recommended Port Role
WS-CE500-24TT Fast Ethernet ports 1 to 24 Desktop
Gigabit Ethernet or SFP module ports 1 and 2 Switch
WS-CE500-24LC Fast Ethernet ports 1 to 4 Access Point
Fast Ethernet ports 5 to 24 Desktop
Gigabit Ethernet or SFP module ports 1 and 2 Switch
WS-CE500-24PC Fast Ethernet ports 1 to 24 IP Phone+Desktop
Gigabit Ethernet or SFP module ports 1 and 2 Switch
WS-CE500G-12TC Gigabit Ethernet ports 1 to 8 Server
Gigabit Ethernet or SFP module ports 9 to 12 Switch
To Next Page
Loading...
