Creates a conference call.Conference button5
Places an active call on hold.Hold button6
The Navigation bar allows you to scroll through menus and highlight items.
When phone is on hook, displays phone numbers from your Placed Call
listing (up arrow) or your speed dials (down arrow).
The Select button (in the middle of the Navigation bar) allows you to select
a highlighted item.
Navigation bar and Select
button
7
Line 1 selects the primary phone line.
Depending on how your system administrator sets up the phone, Line 2 may
provide access to:
•
Secondary phone line
•
Speed-dial number (speed-dial button)
•
Web-based service (for example, a Personal Address Book button)
Buttons illuminate to indicate status:
•
Green, steady: Active call
•
Green, flashing: Held call
•
Amber, flashing: Incoming call or reverting call
•
Red, steady: Remote line in use (shared line)
•
Red, flashing: Remote line on hold
Line 1 and Line 2 buttons8
Toggles the headset on or off. When the headset is on, the button is lit.Headset button9
Toggles the speakerphone on or off. When the speakerphone is on, the button
is lit.
Speakerphone button10
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 User Guide for Cisco Unified Communications Manager 9.0
(SCCP and SIP)
4
Features of Your Cisco Unified IP Phone
Buttons and hardware
To Next Page
Loading...
Need help?
General
