What to do if Cisco 6901 keeps resetting?
If your Cisco IP Phone is resetting, it's likely due to a network connectivity disruption, such as cable breaks, switch outages, or switch reboots. To resolve this, ensure that both the network connection and the Cisco Unified Communications Manager connection are stable.
What to do if Cisco 6901 does not start?
If your Cisco IP Phone isn't starting up correctly, it could be due to faulty cables, bad connections, network outages, or a lack of power. First, verify that the network port is working. If issues persist, perform a factory reset of the phone.
Why my Cisco IP Phone does not register?
If your Cisco IP Phone doesn't register with Cisco Unified Communications Manager, the Cisco CallManager and TFTP services might not be running. To start these services, navigate to Cisco Unified Serviceability from the Navigation drop-down list in Cisco Unified Communications Manager and click Go.
How to fix Cisco IP Phone unable to obtain IP address?
General| Model | 6901 |
|---|---|
| Type | IP Phone |
| Power over Ethernet (PoE) | Yes |
| Protocols | SCCP |
| Codecs | G.711, G.729 |
Explains network connection setup for the Cisco Unified IP Phone 6901.
Identifies and describes the physical buttons and hardware components of the 6901 model.
Covers footstand adjustment and handset rest configuration for the 6901.
Details network connection setup for the Cisco Unified IP Phone 6911.
Identifies and describes the physical buttons and hardware components of the 6911 model.
Covers the paper label for contacts and footstand usage for the 6911.
Explains how to adjust the handset rest for the 6911 model.
Covers checking, personalizing, and listening to voice messages on the phone.
Explains Auto Answer, Auto Barge, and Call Forward All features.
Details how to answer calls using pickup and respond to call waiting notifications.
To Next Page
