Cisco 7200 VXR - Page 45

1-45
Cisco 7200 VXR Installation and Configuration Guide
78-5469-03
Chapter 1 Cisco 7200 VXR Product Overview
Field-Replaceable Units
Input/Output Controller C7200-I/O-GE+E
Figure 1-19 shows the LEDs on the I/O controller with the Gigabit Ethernet port
and the Ethernet port (C7200-I/O-GE+E), and Table 1-16 lists the LEDs specific
to this I/O controller model.
Figure 1-19 C7200-I/O-GE+E LEDs and CPU Reset Button
Input/Output Controller C7200-I/O-2FE/E
Figure 1-20 shows the LEDs on the I/O controller with the two auto-sensing
10/100 Mbps RJ-45 receptacles (C7200-I/O-2FE/E), and Table 1-17 lists the
LEDs specific to this I/O controller model.
Table 1-16 C7200-I/O-GE+E I/O Controller LEDs
LED Color Function
LINK Green Indicates that the Ethernet RJ-45 receptacle has established a valid link
with the network. This LED remains off during normal operation of the
router unless there is an incoming carrier signal.
CLASS 1 LED PRODUCT
PRODUKT MIT KLASSE 1 LED
PRODUIT AVEC VOYANT DEL
DE CLASSE 1
PRODUCTO LED DE CLASE 1
LINK
ETHERNET GIGABIT ETHERNET INPUT/OUTPUT CONTROLLER
CONSOLE
AUX
PORT
E 0
LINK
SLOT 0
PORT
GE 0
RX
TX
EJECT
PCMCIA
SLOT 1
ENABLED
CPU
RESET
IO PWR
OK
33446
CPU
RESET
IO PWR
OK
LINK
SLOT 0
SLOT 1
C7200-I/O-GE+E
ENABLED
LINK GBIC
EN