Cisco 7200 VXR - Page 46

Chapter 1 Cisco 7200 VXR Product Overview
Field-Replaceable Units
1-46
Cisco 7200 VXR Installation and Configuration Guide
78-5469-03
Figure 1-20 C7200-I/O-2FE/E LEDs and CPU Reset Button
Table 1-17 C7200-I/O-2FE/E I/O Controller LEDs
LED Color Function
100 Mbps Green Indicates that the port is configured for 100-Mbps operation (speed 100),
or if configured for autonegotiation (speed auto), the port has detected a
valid link at 100 Mbps.
Note If the port is configured for 10-Mbps operation, or if it is
configured for autonegotiation and the port has detected a valid
link at 10 Mbps, the LED remains off.
LINK Green Indicates that the Ethernet/Fast Ethernet RJ-45 receptacle has established
a valid link with the network. This LED remains off during normal
operation of the router unless there is an incoming carrier signal.
DUAL FAST ETHERNET INPUT/OUTPUT CONTROLLER
CONSOLE
AUX
100 Mbps
LINK
100 Mbps
LINK
SLOT 0
EJECT
PCMCIA
SLOT 1
ENABLED
CPU
RESET
IO PWR
OK
33444
CPU
RESET
IO PWR
OK
100 Mbps
LINK
SLOT 0
SLOT 1
C7200-I/O-2FE/E
ENABLED
FE/E 0 FE/E 1