Cisco 7916 - Connecting the Support Bar

3
Before You Begin
Before you begin installing your Cisco Unified IP Phone
Expansion Module 7916, read each of these sections:
• Package Contents, page 3
• Footstand Kits, page 3
• Additional Equipment, page 4
• Safety Information, page 4
Package Contents
Verify that your package contents includes the following items:
• One Cisco Unified IP Phone Expansion Module 7916
• One interface cable
Footstand Kits
In addition to the package contents, you also need a Footstand
Kit (separate orderable item). If you are attaching one
Cisco
Unified IP Phone Expansion Module 7916, you need the
single Footstand Kit. If you are attaching two
Expansion
Module 7916s, you need the double Footstand Kit.
The Footstand Kit contains:
• One support bar (single with one thumbscrew, or double
with two thumbscrews)
• One footstand