Cisco 7925G (SCCP) User Manual

2
1 Overview
This guide provides Phone, soft key, and features descriptions for the Cisco Unified IP Phone models 7925G.
Physical Layout
The Cisco Unified IP phone 7925G is a single-line phone and a qualified Bluetooth wireless device (Qualified Device ID (QDID)
B014396). In addition to the basic call handling feature, the 7925G phone supports the use of Bluetooth wireless headsets and
certain handsfree call features.
1
Indicator light
(LED)
Provides these indications:
• Solid red—Phone is connected to AC power source, and battery is charging.
• Solid green—Phone is connected to AC power source, and battery is fully
charged.
• Fast blinking red—Incoming call. (Phone can be charging or fully charged.)
• Slow blinking red—Voice message. (When phone is connected to AC power
source, red light displays longer than when using only the battery.)
• Slow blinking green—Phone is using only battery power. Phone is
registered with the wireless network and is within service coverage area.
2
Headset port Port for plugging in a headset or earbud.
3
Speaker button Toggles speaker mode on or off for the phone.
2
3
187500
15
16
17
1
4
6
5
7
8
+
9
10
12
11
13
14

Cisco 7925G (SCCP) Specifications

General

Resolution	176 x 220 pixels
Connectivity	802.11a/b/g
Protocols	SCCP
Headset Jack	2.5 mm
Speakerphone	Yes
Frequency Band	2.4 GHz and 5 GHz
Relative Humidity	10% to 95% (non-condensing)
Display	2 inch color display
Battery	Lithium-ion
Audio	G.711a, G.711u, G.729a, iLBC
Durability	IP54 rated
Security	WPA, WPA2
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-22°F to 140°F (-30°C to 60°C)