Cisco IP Phone 7945 Phone Instructions | 1
Cisco IP Phone 7945 Phones
Instructions
Programmable Buttons (Softkeys)
Depending on configuration, programmable buttons provide access to:
! Phone lines (line buttons) and intercom lines.
! Speed-dial numbers (speed-dial buttons, including the BLF – busy
indicator, speed-dial feature).
! Web-based services (for example, a Personal Address Book button).
! Call features (for example, Privacy, Hold or Transfer button).
Buttons illuminate to indicate status:
Green, steady—Active call or two-way intercom call.
Green, flashing—Held call
Amber, steady—Privacy in use, one-way intercom call,
DND active or logged into Hunt Group
Amber, flashing—Incoming call or reverting call
Red, steady—Remote line in use (shared line or BLF
status).
Enables you to adjust the angle of the phone base.
Cisco Unified IP Phone 7965G: Awakens the phone screen from sleep mode.
No color – Ready for input.
Green Steady – Sleep mode.
Auto-dials your voice message service (varies by service).
Opens/closes the Directories menu. Use it to access call logs and directories.
Opens/closes the Settings menu. Use it to change phone screen and ring
settings.
Opens/closes the Services menu.
Controls the handset, headset, and speakerphone volume (off-hook) and the
ringer volume (on-hook).
Toggles the speakerphone on or off. When the speakerphone is on, the
button is lit.
Toggles the microphone on or off. When the microphone is muted, the
button is lit.
Toggles the headset on or off. When the headset is on, the button is lit.
4-Way Navigation
pad button and
Select button
(center)
Enables you to scroll through menus and highlight items. Use the Select
button to select an item that is highlighted on the screen. Navigation button –
Scroll up and down to see menus and highlight items and right and left across
multiple-column displays. Select button – Scroll to highlight a line using the
Navigation button and then press to open a menu, play a ringer item, or
access other features, as described on the screen.
Enables you to dial phone numbers, enter letters and choose menu items.
Each activates a softkey option (displayed on your phone screen).
Indicates an incoming call or new voicemail message.
To Next Page
Need help?
General
