Cisco 8500 Series - Features Not Currently Supported on the 8500 Controller Platform; Look and Feel of the Cisco 8500 Controller

Features not Currently Supported on the 8500 Controller Platform
These features are not currently supported on the 8500 Controller platform:
Local Authentication (where the Controller acts as the authentication server)•
Internal DHCP server•
Wired Guest•
TrustSec SXP•
Look and Feel of the Cisco 8500 Controller
The Cisco 8500 Controller enables console redirect by default with baud rate 9600 simulating a VT100
terminal with no flow control. The 8500 Controller has the same boot sequence as existing controller
platforms.
As with all other controller platforms, initial boot up requires configuration using the Wizard menu.