Cisco 890 Series Installation Guide

A-18
Cisco Integrated Services Router Hardware Installation Guide
OL-27407-02
Appendix A Technical Specifications
Cisco 860, 880, 890 Series
Table A-11 Router Specifications
Description Design Specification
Physical Dimensions
Nonwireless models (H x W x D):
• 1.9 x 12.8 x 9.8 in. (48 x 325 x 249 mm)
(includes rubber feet)
• 1.75 x 12.8 x 9.8 in. (44 x 325 x 249 mm)
(without rubber feet)
Wireless models (H x W x D):
• 1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm)
(includes rubber feet)
• 1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm)
(without rubber feet; excludes antennas)
• Weight: 5.5 lb (2.5 kg) maximum
External Power Supply
Universal 100 to 240 VAC input; 60W, 12 VDC
output
Router Power Specifications
AC input voltage 100 to 240 VAC
Frequency 50 to 60 Hz
Maximum output power 60W
Output voltages 12 VDC
Optional internal PoE with
external adapter
Maximum output power 80W
External output voltage 48 VDC
Environmental Operating
Ranges
Nonoperating temperature -4 to 149°F (-20 to 65°C)
Nonoperating humidity 5 to 95% relative humidity (noncondensing)
Nonoperating altitude 0 to 15,000 ft (0 to 4570m)
Operating temperature
• At sea level: 32 to 104°F (0 to 40°C)
• Up 10,000 ft: 32 to 77°F (0 to 25°C)
• Derating 2.7°F/10000 ft (1.5°C/1000 ft)
Operating humidity 10 to 85% relative humidity (noncondensing)
Operating altitude 0 to 10,000 ft (0 to 3000m)

Cisco 890 Series Specifications

General

Product Type	Router
Form Factor	Desktop
USB Ports	1 x USB 2.0
Firewall	Yes
VPN Support	Yes
RAM	256 MB
Wireless	802.11n
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	10 to 85% non-condensing
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network / Transport Protocol	TCP/IP
Routing Protocol	OSPF, BGP, RIP-1, RIP-2, EIGRP, HSRP, VRRP
Remote Management Protocol	SNMP, Telnet, HTTP, HTTPS, SSH
Features	VPN support, firewall protection, Quality of Service (QoS), VLAN support
Encryption Algorithm	AES, 3DES, DES