Cisco Aironet 1130AG - Checking Basic Settings

41
Quick Start Guide Cisco Aironet 1130AG Access Point
For more details on these LED status codes, see the “Troubleshooting”
chapter of the Cisco Aironet 1130AG Series Access Point Hardware
Installation Guide.
Checking Basic Settings
Mismatched basic settings are the most common causes of lost connectivity
with wireless clients. If the access point does not communicate with client
devices, check the following areas.
— — Blinking
green
Transmitting or receiving
radio packets.
Blinking dark
blue
Green or
blinking
green
Blinking
green or off
Software upgrade in progress.
Amber Various Various IOS errors
Blinking red Various Various Boot loader errors
Top of Unit Cable Bay Area
Meaning
Status LED Ethernet LED Radio LED