Cisco 1142 - Aironet Standalone AP - User Manual

GETTING STARTED GUIDE
Cisco Aironet 1140 Series Lightweight Access Point
1 About this Guide
2 Safety Instructions
3 Unpacking
4 Overview
5 Configuring the Access Point
6 Mounting the Access Point
7 Deploying the Access Point on the Wireless Network
8 Troubleshooting
9 Declarations of Conformity and Regulatory Information
10 Configuring DHCP Option 43 and DHCP Option 60
11 Access Point Specifications

Cisco 1142 - Aironet Standalone AP Specifications

General

Product Type	Wireless Access Point
Frequency Bands	2.4 GHz and 5 GHz
Maximum Data Rate	300 Mbps
Model	Cisco Aironet 1142
Wireless Standards	IEEE 802.11a/b/g/n
Ethernet Ports	1 x 10/100/1000
Power over Ethernet (PoE)	Yes (802.3af)
Operating Temperature	32°F to 104°F (0°C to 40°C)
Mounting Options	Ceiling, Wall
Antennas	Internal
Security Features	WPA, WPA2, 802.1X

Summary

About this Guide

Safety Instructions

Unpacking

Overview

Configuring the Access Point

The Controller Discovery Process

Explains how the access point discovers and connects to a wireless LAN controller using CAPWAP protocol.

Mounting the Access Point

Deploying the Access Point on the Wireless Network

Troubleshooting

Declarations of Conformity and Regulatory Information

Configuring DHCP Option 43 and DHCP Option 60

Access Point Specifications