To Next PageTo Next PageHow to fix Cisco Aironet 1200 not communicating with client devices?
If your Cisco Wireless Access Point isn't communicating with client devices, the issue might be due to mismatched basic settings. Ensure that the SSID and WEP settings on the access point match those on the client devices.
What to do if Cisco Wireless Access Point has a corrupt firmware image?
If your Cisco Wireless Access Point has a corrupt firmware image, indicated by three red LEDs, reload the image from a connected TFTP server.
What to do if Cisco Wireless Access Point firmware failure?
In case of a firmware failure on your Cisco Wireless Access Point, reload the complete access point image file using the Web browser interface or by pressing and holding the MODE button.
How to upgrade firmware image on Cisco Aironet 1200 Wireless Access Point?
If the firmware on your Cisco Wireless Access Point is operational but you want to upgrade it, use the Web browser interface to reload the access point image file.
General| Wireless Standards | 802.11a, 802.11b, 802.11g |
|---|---|
| Data Transfer Rate | Up to 54 Mbps |
| Product Type | Wireless Access Point |
| Brand | Cisco |
| Model | Aironet 1200 Series |
| Frequency Band | 2.4 GHz, 5 GHz |
| Security | WEP, WPA, WPA2, 802.1X, TKIP, AES |
| Power Options | Power over Ethernet (PoE) |
Defines the intended audience and scope of the guide.
Outlines the structure and chapters of the document.
Explains text and symbol conventions used in the manual.
Lists other relevant Cisco documentation.
Provides information on how to obtain Cisco documentation.
Details how to get technical support from Cisco.
Highlights the main functionalities of the access point firmware.
Describes available interfaces for managing the access point.
Illustrates common wireless network configurations using the access point.
Explains how to use the graphical web-based interface for access point management.
Details how to configure the access point using CLI via terminal or Telnet.
Describes how to configure and use SNMP for access point management.
Covers essential access point configuration settings on the Express Setup page.
Explains how to configure protocol and MAC address filtering for data flow control.
Details settings for configuring the access point's radio hardware and parameters.
Covers configuration settings for the access point's Ethernet port.
Explains how to configure server settings like time, boot, web, and name servers.
Describes how to configure default gateway and network routes for IP communication.
Covers customization options for displaying information in the Association Table.
Details how to configure event display, handling, and notifications for access point events.
Provides an overview of security features to protect the wireless network.
Details how to set up Wired Equivalent Privacy (WEP) keys and encryption.
Enables MIC, TKIP, and broadcast WEP key rotation for enhanced security.
Covers configuring Open or Shared Key authentication methods for wireless clients.
Details how to set up Extensible Authentication Protocol (EAP) for secure client authentication.
Explains how to configure MAC address filtering for client authentication.
Provides a summary of required settings for various authentication types.
Describes how to configure backup servers for authentication services.
Covers setting up user accounts to manage access to the access point system.
Explains how to view and manage connected wireless devices.
Describes how to visualize the wireless network topology.
Details how to use CDP for device discovery and network management.
Covers assigning specific network ports to devices like repeaters or bridges.
Explains how to configure accounting data collection for wireless clients.
Provides instructions for updating the access point's firmware.
Explains how to distribute firmware to multiple Cisco Aironet access points.
Covers distributing access point configurations to other devices on the network.
Details procedures for managing access point configurations, including backup and reset.
Describes how to configure the access point for SNMP management.
Covers configuring console and Telnet access for managing the access point.
Explains how to configure an access point as a repeater to extend wireless range.
Details how to set up an access point in Hot Standby mode for redundancy.
Explains how to use diagnostic pages for detailed statistics and event records.
Details how to use CLI commands for viewing diagnostic information and troubleshooting.
Explains how to trace packets sent and received by the access point and network devices.
Describes the meaning of the access point's top panel indicator lights.
Guides on checking fundamental settings to resolve connectivity issues.
Provides steps to reset the access point's configuration to factory defaults.
Lists channel identifiers, center frequencies, and regulatory domains for 22-MHz channels.
Indicates maximum power levels and antenna gains allowed per regulatory domain.
Lists protocols available for Ethertype filters.
Lists protocols available for IP Protocol filters.
Lists protocols available for IP Port Protocol filters.
