6-5
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Chapter 6 Managing Firmware and Configurations
Updating Firmware
Updating from a File Server
When you update the firmware from a file server, you load new firmware through
FTP or TFTP from a file server. You can update the three firmware
components—the management system firmware, the firmware web pages, and the
radio firmware—individually or all at once. It is simplest to update all the
components at once, but in some situations you might want to update them
individually.
Full Update of the Firmware Components
To update all the firmware components at the same time, click From File Server
on the Fully Update Firmware line on the Cisco Services Setup page. The Update
All Firmware From File Server page appears. Figure 6-4 shows the Update All
Firmware From File Server page.
Figure 6-4 Update All Firmware From File Server Page
Follow these steps to update all three firmware components from a file server:
Step 1 Click the File Server Setup link to enter the FTP settings. The FTP Setup page
appears. Figure 6-5 shows the FTP Setup page.
To Next Page
Loading...
