To Next PageTo Next PageHow to fix Cisco Aironet 1200 not communicating with client devices?
If your Cisco Wireless Access Point isn't communicating with client devices, the issue might be due to mismatched basic settings. Ensure that the SSID and WEP settings on the access point match those on the client devices.
What to do if Cisco Wireless Access Point has a corrupt firmware image?
If your Cisco Wireless Access Point has a corrupt firmware image, indicated by three red LEDs, reload the image from a connected TFTP server.
What to do if Cisco Wireless Access Point firmware failure?
In case of a firmware failure on your Cisco Wireless Access Point, reload the complete access point image file using the Web browser interface or by pressing and holding the MODE button.
How to upgrade firmware image on Cisco Aironet 1200 Wireless Access Point?
If the firmware on your Cisco Wireless Access Point is operational but you want to upgrade it, use the Web browser interface to reload the access point image file.
General| Wireless Standards | 802.11a, 802.11b, 802.11g |
|---|---|
| Data Transfer Rate | Up to 54 Mbps |
| Product Type | Wireless Access Point |
| Brand | Cisco |
| Model | Aironet 1200 Series |
| Frequency Band | 2.4 GHz, 5 GHz |
| Security | WEP, WPA, WPA2, 802.1X, TKIP, AES |
| Power Options | Power over Ethernet (PoE) |
