EasyManua.ls Logo

Cisco Aironet 1815w User Manual

Cisco Aironet 1815w
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
GETTING STARTED GUIDE
Cisco Aironet 1815w Access Points
First Published: April 14, 2017
Last Updated: August 3, 2022

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Cisco Aironet 1815w and is the answer not in the manual?

Cisco Aironet 1815w Specifications

General IconGeneral
2.4 GHzYes
Number of users400 user(s)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.11r, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Maximum data transfer rate1000 Mbit/s
Maximum data transfer rate (5 GHz)867 Mbit/s
Security algorithms802.1x RADIUS, AES, EAP, EAP-FAST, EAP-PEAP, EAP-SIM, EAP-TLS, EAP-TTLS, MSCHAPv2, WPA, WPA2
WAN connectionEthernet (RJ-45)
USB 2.0 ports quantity0
Ethernet LAN (RJ-45) ports3
PlacementTable, Wall
Product colorWhite
Cable lock slot typeKensington
Antenna typeInternal
Antenna featuresIntegrated antenna
Antenna gain level (max)3 dBi
Flash memory256 MB
Internal memory1024 MB
Operating altitude0 - 3000 m
Non-operating altitude0 - 4572 m
Storage temperature (T-T)-30 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth140 mm
Width89 mm
Height31.5 mm
Weight280 g

Summary

Safety Instructions

Unpacking the Access Point

Access Point Ports and Connectors

Preparing Access Point for Installation

Pre-Installation Configuration

Access Point Mounting

Mounting Directly on a Wall

Provides step-by-step instructions for mounting the access point directly onto a wall.

Mounting on Electrical Junction Box

Provides step-by-step instructions for mounting the access point on an electrical junction box.

Mounting on Wall with Spacer

Details the process of mounting the access point on a wall using a spacer box.

Powering the Access Point

Configuring and Deploying the Access Point

Access Point LED Status Checks

Troubleshooting Controller Join Process

Configuring DHCP Option 43

Related product manuals