29
10 Powering the Access Point
The AP can be powered using Power-over-Ethernet (PoE) from the Ethernet cable on either one of the
uplink ports, from an external power source such as:
• Cisco Power Injector AIR-PWRINJ5= (for 802.3af) or AIR-PWRINJ6= (for 802.3at).
• 802.3af or 802.3at compatible PoE switching infrastructure
• 802.3af or 802.3at compatible power injectors
The PoE-Out port (labeled PSE) provides 802.3af power when the AP is powered by 802.3at
power, and no power output when the AP is powered by 802.3af power.
To Next Page
Loading...
