Cisco Aironet 1815i User Manual

GETTING STARTED GUIDE
Cisco Aironet 1815i Access Point
First Published: November 10, 2017
Last Updated: February 27, 2019

Cisco Aironet 1815i Specifications

General

5 GHz	Yes
Frequency band	2.412 - 2.472, 5.18 - 5.32, 5.5 - 5.6, 5.64 - 5.7 GHz
Channels quantity	29 channels
Transmitting power	4 dBmW
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.11r, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	1000 Mbit/s
Maximum data transfer rate (5 GHz)	867 Mbit/s
Internal	No
Placement	Table
Certification	UL 60950-1 CAN/CSA-C22.2 No. 60950-1 UL 2043 IEC 60950-1 EN 60950-1 FCC Part 15.247, 15.407 RSS-247 (Canada) EN 300.328, EN 301.893 (Europe) ARIB-STD 66 (Japan) ARIB-STD T71 (Japan) EMI (Class B FCC Part 15.107 and 15.109 ICES-003 (Canada) VCCI (Japan) EN 301.489-1 and -17 (Europe) EN 50385
Product color	White
Flash memory	256 MB
Internal memory	1024 MB
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Security algorithms	802.1x RADIUS, AES, EAP-SIM, EAP-TLS, EAP-TTLS, MSCHAPv2, PEAP, WPA, WPA2
Antenna features	Integrated antenna
Antenna gain level (max)	4 dBi
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 4500 m
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Number of products included	1 pc(s)

Weight and Dimensions

Width	150.8 mm
Height	33 mm
Weight	400 g

Summary

About the Access Point

Access Point Features

Lists supported modes, radio features, and external hardware interfaces.

Safety Instructions

Important Safety Instructions

Key warnings regarding electrical hazards and safe operating practices.

Ports and Connectors on the AP

AP Ports and Buttons

Preparing the AP for Installation

Performing a Pre-Installation Configuration

Mounting and Grounding the Access Point

Mounting Configurations

Powering the Access Point

Configuring and Deploying the Access Point

The Controller Discovery Process

Explains how the AP discovers and connects to a wireless LAN controller using CAPWAP.

Deploying the Access Point on the Wireless Network

Steps for connecting and powering up the AP, and observing LED status.

Checking the Access Point LED

Access Point Status LED Details

Details the status LED indicator and its various states and meanings.

Troubleshooting the Access Point to Cisco Controller Join Process

Common Join Failures

Lists reasons APs fail to join a controller and how to troubleshoot.

Controller-based Deployment Information

Configuring DHCP Option 43

Declarations of Conformity and Regulatory Information

FCC Declaration of Conformity

Canadian Compliance Statement

R&TTE Directive Declaration of Conformity

RF Exposure Guidelines