To Next PageTo Next PageWhat does 'DRAM memory test OK' mean on Cisco Aironet 1140?
When the Cisco Wireless Access Point displays 'DRAM memory test OK', it indicates that the memory test has passed, and the device should continue with normal operation.
General| Brand | Cisco |
|---|---|
| Model | Aironet 1140 Series |
| Category | Wireless Access Point |
| Language | English |
Verify contents of access point and accessory kit from shipping.
Identify and understand the access point's ports and physical components.
Assess the environment to determine the optimal access point installation location.
Establish a console connection to the access point for local configuration.
Configure the Bridge-Group Virtual Interface (BVI) with an IP address via CLI.
Utilize Telnet to access the command-line interface for IP address assignment.
Set up radio interfaces, including role, optimization, and extension capabilities.
Activate wireless radios and prepare for network association.
Create SSIDs, define security types, and manage VLAN assignments.
Explore security protocols, 802.11n requirements, and configuration constraints.
Step-by-step guide to creating a new SSID using the Express Security page.
Interpret LED status indicators for diagnosing access point issues.
