Cisco Aironet 1200 Series - Appendix; Priming Lightweight Access Points Prior to Deployment

F-1
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-8370-04
APPENDIX
F
Priming Lightweight Access Points Prior to
Deployment
This section describes an optional procedure designed to prime or stage your lightweight access points
in a convenient location rather than after they are installed in possibly difficult to reach locations. This
helps limit potential installation problems to primarily Ethernet and power areas.
Figure F-1 i
llustrates a typical priming configuration for your access points.
Figure F-1 Typical Lightweight Access Point Priming Configuration
158085
LWAPP
LWAPP