Chapter 6 Managing Firmware and Configurations
Downloading, Uploading, and Resetting the Configuration
6-10
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Figure 6-8 Distribute Configuration Page
Follow this link path in the browser interface to reach the Distribute Configuration
page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Cisco Services Setup.
3. On the Cisco Services page, click Distribute Configuration to other Cisco
Devices.
Follow these steps to distribute the access point’s configuration to other access
points:
Step 1 Follow the link path to reach the Distribute Configuration page.
Step 2 Click Start. The access point’s configuration, except for its IP identity and its
User List, is distributed to the access points on your network. To cancel the
distribution, click Abort.
Downloading, Uploading, and Resetting the
Configuration
You use the System Configuration Setup page to download the current access
point configuration to a local drive, upload a configuration from a local drive or
file server, and reset the configuration to default settings. You can also use the
System Configuration Setup page to restart the access point. Figure 6-9 shows the
System Configuration Setup page.
To Next Page
Loading...
