Chapter 6 Managing Firmware and Configurations
Updating Firmware
6-2
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Updating Firmware
You use the Cisco Services Setup page to update the access point’s firmware. You
can perform the update by browsing to a local drive or by using FTP to update the
firmware from a file server. Figure 6-1 shows the Cisco Services Setup page.
Figure 6-1 Cisco Services Setup Page
Follow this link path in the browser interface to reach the Cisco Services Setup
page:
1. On the Summary Status page, click Setup.
2. On the Setup page, click Cisco Services Setup.
Updating with the Browser from a Local Drive
When you update the firmware with your browser, you browse to your hard drive
or to a mapped network drive for the new firmware. You can update the three
firmware components—the management system firmware, the firmware web
pages, and the radio firmware—individually or all at once. It is simplest to update
all the components at once, but in some situations you might want to update them
individually.
To Next Page
Loading...
