Cisco Aironet 340 Series - After Your Password Expires (Windows NT or 2000 Domain Databases Only)

6-7
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
OL-1375-03
Chapter 6 Using EAP Authentication
Using PEAP
Step 5 Enter your PEAP username and password (which are registered with the RADIUS server) in the
appropriate fields.
Step 6 If applicable, enter your domain name in the Domain field.
Note A domain name is not required for OTP databases.
Step 7 Tap OK. The client adapter should now EAP authenticate. To verify authentication, select Start >
Programs > Cisco > AuthMgr. The Status field at the bottom of the screen shows the authentication
status. If the authentication is successful, the Status field displays Authenticated, and the IP Address
field displays the IP address of the client adapter.
After Your Password Expires (Windows NT or 2000 Domain Databases Only)
If you are using a Windows NT or 2000 domain database with PEAP and the password for your current
username expires, follow the steps below to change your password.
Step 1 When the Change Password screen appears (see Figure 6-4) to indicate that your password has expired,
enter your old password in the Old Password field.
Figure 6-4 Change Password Screen