Cisco ASA 5506W-X

5506H-X, the LEDs are located on the bottom left of the chassis. The network port LEDs are at the top sides
of each network port. See Rear Panel, on page 6 for more information.
The following figure shows the LEDs on the top left edge.
Figure 7: LEDs
Status
System operating status:
• Green – Normal
system function.
• Amber – Critical
alarm indicating one
or more of the
following:
•
Major failure
of a hardware
or software
component.
•
Over-temperature
condition.
•
Power voltage
outside the
tolerance
range.
2Power
Power supply status:
• Unlit – Power
supply off.
• Solid green – Power
supply on.
See Power Supply
Modules, on page 13 for
additional power
information specific to
your specific ASA.
1
Cisco ASA 5506-X, ASA 5506W-X, and ASA 5506H-X Hardware Installation Guide
Online Only 9
Overview
LEDs