Cisco ASA 5512-X Hardware Installation Guide

Installing and Connecting the ASA 5500-X
Rack Mount the Chassis
Cisco ASA 5512-X, ASA 5515-X, ASA 5525-X, ASA 5545-X, and ASA 5555-X Hardware Installation Guide
39
Figure 7 Install Two Shoulder Screws on Either Side of the Chassis
Rack Mount the Chassis with the Slide Rail Mounting System
This section describes how to mount the chassis using the slide rail mounting system.
Although slide rail mounting is preferred, in the case of two-rail racks where the slide rails will not fit, you can use
the rack mounting brackets. You must order them separately (ASA-BRACKETS=). Note that there will be a slight
bend in the brackets when you attach them. For the procedure for attaching the brackets to the front or back of
the chassis, see Rack Mount the ASA 5512-X, 5515-X, and 5525-X With Brackets, page 35.
Before You Begin
 Verify the box contents
371236
371237

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs