Cisco ASA 5516-X User Manual

Total: 8 GB
Allocated to FW/VPN: 4 GB
Allocated to Module: 4 GB
DRAM
8 GBInternal Flash
60 WPower
Environment
Operating: 0 to 40°C (32 to 104°F)
Nonoperating: -25 to 70°C (-13 to 158°F)
Temperature
Operating: 90%
Nonoperating: 10 to 90%
Relative humidity
Operating: 3048 m (10,000 ft)
Nonoperating: 4572 m (15,000 ft)
Maximum altitude
Typical: 41.6 dBA
Maximum: 67.2 dBA
Acoustic Noise
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords provided with the security appliance are supported. The following table lists
the supported power cords.
Note
The following illustrations show the cord, connector, and plug for each country listed in the table above.
Figure 4: Argentina (CAB-ACR)
Overview
8
Overview
Power Cord Specifications

Cisco ASA 5516-X Specifications

General

Firewall Throughput	1.8 Gbps
Concurrent Sessions	500, 000
Form Factor	1RU
Memory	8 GB
Flash Memory	8 GB
AC Input	100-240V AC
Maximum VLANs	1024
RAM	8 GB
Operating Temperature	32 to 104°F (0 to 40°C)
Storage Temperature	-13 to 158°F (-25 to 70°C)
Humidity	10 to 90% non-condensing
Power Supply	AC
Frequency	50 to 60 Hz
Interfaces	8 x 1Gbps (RJ-45), 8 x 1Gbps (SFP)