67-77
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 67 Clientless SSL VPN
Configuring Browser Access to Client-Server Plug-ins
Step 1 Make sure clientless SSL VPN (“webvpn”) is enabled on a adaptive security appliance interface.
Step 2 Install an SSL certificate onto the adaptive security appliance interface to which remote users use a
fully-qualified domain name (FQDN) to connect.
Note Do not specify an IP address as the common name (CN) for the SSL certificate. The remote user
attempts to use the FQDN to communicate with the adaptive security appliance. The remote PC
must be able to use DNS or an entry in the System32\drivers\etc\hosts file to resolve the FQDN.
See the section that identifies the type of plug-in you want to provide for clientless SSL VPN access.
• Installing Plug-ins Redistributed by Cisco
• Assembling and Installing Third-Party Plug-ins—Example: Citrix
Installing Plug-ins Redistributed by Cisco
Cisco redistributes the following open-source, Java-based components to be accessed as plug-ins for web
browsers in clientless SSL VPN sessions:
Table 67-9 Plug-ins Redistributed by Cisco
Cisco Download Link Protocol Description Source of Redistributed Plug-in
rdp-plugin.090915.jar RDP Accesses Microsoft Terminal Services hosted by
Windows Vista and Windows 2003 R2.
Supports Remote Desktop ActiveX Control.
We recommend using this plug-in that supports
both RDP and RDP2. Only versions up to 5.2 of
the RDP and RDP2 protocols are supported.
Version 5.2 and later are not supported.
Cisco redistributes this plug-in
without any changes to it per GNU
General Public License. The original
source of the redistributed plug-in is
http://properjavardp.sourceforge.net/
rdp2-plugin.090211.jar RDP2 Accesses Microsoft Terminal Services hosted by
Windows Vista and Windows 2003 R2.
Supports Remote Desktop ActiveX Control.
Note This legacy plug-in supports only RDP2.
Cisco redistributes this plug-in
without any changes to it per the
GNU General Public License. The
original source of the redistributed
plug-in is
http://properjavardp.sourceforge.net/
rdp-plugin.080506.jar RDP Accesses Microsoft Terminal Services hosted by
Windows 2003 R1.
Supports Remote Desktop ActiveX Control.
Note This legacy plug-in supports only RDP.
Cisco redistributes this plug-in
without any changes to it per the
GNU General Public License. The
source of the redistributed plug-in is
http://properjavardp.sourceforge.net/
To Next Page
Loading...
