Contents
xviii
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Enabling EIGRP 23-4
Enabling EIGRP Stub Routing 23-5
Customizing EIGRP 23-6
Defining a Network for an EIGRP Routing Process 23-7
Configuring Interfaces for EIGRP 23-7
Configuring Passive Interfaces 23-8
Configuring the Summary Aggregate Addresses on Interfaces 23-9
Changing the Interface Delay Value 23-10
Enabling EIGRP Authentication on an Interface 23-10
Defining an EIGRP Neighbor 23-11
Redistributing Routes Into EIGRP 23-12
Filtering Networks in EIGRP 23-13
Customizing the EIGRP Hello Interval and Hold Time 23-15
Disabling Automatic Route Summarization 23-15
Configuring Default Information in EIGRP 23-16
Disabling EIGRP Split Horizon 23-17
Restarting the EIGRP Process 23-18
Monitoring EIGRP 23-18
Configuration Example for EIGRP 23-18
Feature History for EIGRP 23-20
CHAPTER
24 Configuring Multicast Routing 24-1
Information About Multicast Routing 24-1
Stub Multicast Routing 24-2
PIM Multicast Routing 24-2
Multicast Group Concept 24-2
Multicast Addresses 24-2
Licensing Requirements for Multicast Routing 24-2
Guidelines and Limitations 24-3
Enabling Multicast Routing 24-3
Customizing Multicast Routing 24-4
Configuring Stub Multicast Routing 24-4
Configuring a Static Multicast Route 24-4
Configuring IGMP Features 24-5
Disabling IGMP on an Interface 24-6
Configuring IGMP Group Membership 24-6
Configuring a Statically Joined IGMP Group 24-7
Controlling Access to Multicast Groups 24-8
Limiting the Number of IGMP States on an Interface 24-8
To Next Page
Loading...
