Cisco ASA 5580 - Page 19

Contents
xix
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Modifying the Query Messages to Multicast Groups 24-9
Changing the IGMP Version 24-9
Configuring PIM Features 24-10
Enabling and Disabling PIM on an Interface 24-10
Configuring a Static Rendezvous Point Address 24-11
Configuring the Designated Router Priority 24-12
Configuring and Filtering PIM Register Messages 24-12
Configuring PIM Message Intervals 24-13
Configuring a Route Tree 24-13
Configuring a Multicast Group 24-14
Filtering PIM Neighbors 24-14
Configuring a Bidirectional Neighbor Filter 24-15
Configuring a Multicast Boundary 24-16
Configuration Example for Multicast Routing 24-17
Additional References 24-18
Related Documents 24-19
RFCs 24-19
Feature History for Multicast Routing 24-19
CHAPTER 25 Configuring IPv6 Neighbor Discovery 25-1
Configuring Neighbor Solicitation Messages 25-1
Configuring the Neighbor Solicitation Message Interval 25-1
Information About Neighbor Solicitation Messages 25-2
Licensing Requirements for Neighbor Solicitation Messages 25-2
Guidelines and Limitations for the Neighbor Solicitation Message Interval 25-3
Default Settings for the Neighbor Solicitation Message Interval 25-3
Configuring the Neighbor Solicitation Message Interval 25-3
Feature History for the Neighbor Solicitation Message Interval 25-4
Configuring the Neighbor Reachable Time 25-4
Information About Neighbor Reachable Time 25-4
Licensing Requirements for Neighbor Reachable Time 25-4
Guidelines and Limitations for Neighbor Reachable Time 25-4
Default Settings for the Neighbor Reachable Time 25-5
Configuring Neighbor Reachable Time 25-5
Configuring DAD Settings 25-5
Configuring IPv6 Addresses on an Interface 25-6
Configuring IPv6 Prefixes on an Interface 25-7
Feature History for Neighbor Reachable Time 25-8
Configuring Router Advertisement Messages 25-8