Index
IN-11
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
host
SNMP
73-4
hosts, subnet masks for A-3
HSRP 5-3
HTTP
application inspection
viewing
37-30
filtering 34-1
configuring 34-9
HTTP(S)
filtering
34-2
HTTP inspection
about
37-24
configuring 37-23
HTTPS/Telnet/SSH
allowing network or host access to ASDM
32-1
I
ICMP
add group
64-21
browse 64-21
rules for access to ADSM 32-9
testing connectivity 76-1
type numbers A-15
ICMP Group 64-21
ICMP unreachable message limits 32-10
Identity Certificates 35-14
identity NAT
about
26-11
network object NAT 27-14
twice NAT 28-15
IKE Policy panel, VPN wizard 62-5
ILS inspection 39-1
IM 38-24
implementing SNMP 73-4
inbound access lists 30-3
individual syslog messages
assigning or changing rate limits
71-21
information reply, ICMP message A-16
information request, ICMP message A-16
inside, definition 1-15
inspection engines
See application inspection
Instant Messaging inspection
38-24
interface
duplex
8-19, 8-20
MTU 8-26
status 3-17
subinterface, adding 8-15
throughput 3-17
Interface panel 21-9
interfaces
ASA 5505
about
8-1
enabled status 8-18
MAC addresses 8-4
maximum VLANs 8-2
switch port configuration 8-18
trunk ports 8-19
ASA 5550 throughput 8-22
default settings 16-2, 17-2, 30-7, 55-6, 56-3
duplex 8-8
failover monitoring 57-11
fiber 8-8
jumbo frame support
single mode
8-26
MAC addresses
automatically assigning
6-19
monitoring 8-36
redundant 8-12
SFP 8-8
speed 8-8
subinterfaces 8-14
intrusion prevention configuration 54-5
IP addresses
classes
A-1
management, transparent firewall 9-14
To Next Page
Loading...
