EasyManuals Logo

Cisco ASR-920-24TZ-M Configuration Guide

Cisco ASR-920-24TZ-M
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Example:
Device# show autonomic neighbors detail
UDI: "PID:A901-12C-FT-D SN:CAT1602U0C3"
Device ID 0006.f6ac.3be0-4
Domain ID manual-cisco
State Nbr inside the Domain
Credential Domain Cert
Credential Validation Passed
Last Validated Time 2014-07-21 12:42:57 IST
Certificate Expiry Date 2015-07-21 12:42:48 IST
Certificate Expire Countdown 31535585 (secs)
Number of Links connected 1
Link:
Local Interface: Vlan4086(GigabitEthernet0/7)
Remote Interface: Vlan4026
IP Address: FE80::4255:39FF:FE8D:C93B
Uptime(Discovered Time): 00:06:36 ( 2014-07-21 12:43:07 IST)
Last Refreshed time: 7 seconds ago
Displays information about the discovered neighbors.
Step 4
show autonomic registrar devices [accepted | quarantine | whitelist]
Example:
Device# show autonomic registrar
Domain ID manual-cisco
Whitelist
Database URL nvram:
Status Autonomic Registrar Live
Address FD8F:E354:CCF9:0:6:F6AC:3BE0:1
Certificate (sub:) cn=ANRA-CS
Displays information about the autonomic registrar.
Step 5
show autonomic control plane [detail]
Example:
Device# show autonomic control-plane
VRF Name cisco_autonomic
Device Address FD08:2EEF:C2EE::D253:5185:547A
RPL Type = Node, Inst-Id = 0, OCP = 0, Mode = Storing
Neighbor ACP Channel ACP Security
--------------------------------------------------------------------------------
PID:A901-4C-F-D SN:CAT1611U085 Tunnel100000
Displays information about the autonomic control plane.
Step 6
show autonomic interfaces
Displays information about the interfaces in the autonomic domain.
Step 7
debug autonomic {bootstrap | neighbor-discovery database | registrar | services} {aaa | all | ntp | events | packets}
{info | moderate | severe}
Enables debugging autonomic network.
Step 8
clear autonomic {device | neighbor UDI}
Clears or resets autonomic information.
The clear autonomic device command clears or resets all the device specific AN information, including the information
obtained in bootstrapping process.
The clear autonomic neighbor command clears the neighbor-related information learned in the neighbor discovery.
If no neighbor is specified, it clears the entire neighbor database.
9

Other manuals for Cisco ASR-920-24TZ-M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR-920-24TZ-M and is the answer not in the manual?

Cisco ASR-920-24TZ-M Specifications

General IconGeneral
BrandCisco
ModelASR-920-24TZ-M
CategoryNetwork Router
LanguageEnglish

Related product manuals