Cisco ASR 9904 Unpacking And Installing

screws (we recommend a minimum of ten per side). These screws can vary in size and type depending on the
rack that you use. Torque the screws to the weight specified for your particular rack.
Figure 86: Attaching the Adapter Plates to the Left and Right Rack Rails on the Cisco ASR 9904 Router Chassis
Step 2 Loosely attach the left and right side air baffles to the adapter plate (Figure 87: Installing the Air Baffles on
the Cisco ASR 9904 Router Chassis , on page 87) with 12-24 screws (four per side). Do not tighten these
screws. To ensure the correct orientation, “Left Front” and “Right Front” are stamped on each side of the
baffle.
Figure 87: Installing the Air Baffles on the Cisco ASR 9904 Router Chassis
Unpacking and Installing the Chassis
87
Unpacking and Installing the Chassis
Installing Optional Air Baffles on the Cisco ASR 9904 Router

Cisco ASR 9904 Specifications

General

Brand	Cisco
Model	ASR 9904
Category	Network Router
Language	English