5
System Basics
Video conferencing functions are carried out using the remote control. When the
system is not in use, it is in standby mode. The screens are black. To wake up
the system pick up the remote or press any key.
When the system is woken up, you will see the system wallpaper along
with a
number of information boxes and menus. The ‘phone number’ of the system
should be displayed in the top left corner. If this is not displayed it is likely that
your system is not properly connected. Please consult the troubleshooting
section or contact your local support team.
The menu is the interface you will use to control the system. Use the arrow keys
to select the menu item you want then press the OK button to select it.
545123456
System Address
Self View
Date & Time
Soft Keys Home Menu
6
The Remote Control
The function keys in the upper part of the
remote control reflect the softkeys on
screen
The middle part of the remote control is used
to handle video, sound, phone book, menus
and navigation
The lower part of the remote control is simi-
lar to the keypad of a mobile phone
To Next Page
Loading...
