CHAPTER 2
Prepare for Router Installation
Before you install the Cisco 1100 Series Integrated Services Routers, you must prepare your site for the
installation. This chapter provides pre-installation information, such as recommendations and requirements
that should be considered before installing your router.
See the following sections to prepare for installation:
• Safety Recommendations, on page 11
• Safety With Electricity, on page 12
• Prevent Electrostatic Discharge Damage, on page 12
• General Site Requirements, on page 13
• NEBS Deployment Site Requirements, on page 14
• Rack Requirements, on page 15
• Router Environmental Requirements, on page 15
• Power Guidelines and Requirements, on page 16
• Network Cabling Specifications, on page 16
Safety Recommendations
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. SAVE THESE INSTRUCTIONS
Statement 1071
Warning
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
11
To Next Page
Loading...
