Async 0/1/0 to Async 0/1/47
0 = 2-9
1 = 10-17
2 = 18-25
3 = 26-33
4 = 34-41
5 = 42-49
2
NIM 0/23
Figure 10: C1100TG-1N24P32A and C1100TGX-1N24P32A: Line Numbering
GigaEthernet 0/0/0 to 0/0/11
Async 0/1/0 to Async 0/1/47
0 = 2-9
1 = 10-17
2 = 18-25
3 = 26-33
4 = 34-41
5 = 42-49
2
GigaEthernet 0/2/0 to 0/2/233
NIM 0/34
Fans, Ventilation and Airflow
Router and chassis temperature is regulated with internal fans. An onboard temperature sensor controls the
fan speed. The fans are always on when the router is powered on. Under most conditions, the fans operate at
the slowest speed to conserve power and reduce noise. When necessary, the fans operate at higher speeds
under conditions of higher ambient temperature.
Hardware Installation Guide for the Cisco 1100 Terminal Gateway
8
About Cisco 1100 Terminal Gateway Routers
Fans, Ventilation and Airflow
To Next Page
Loading...
