Figure 4: CIsco UCS C220 M4 Rear View Details
Connections:
• 1 Admin, Clust
• 8 (left) Clean
• 8 (right) Dirty
• 6 CIMC
Network Interface Setup Diagram
This section describes the most logical and recommended setup for a Threat Grid Appliance. However, each
customer's interface setup is different. Depending on your network requirements, you may decide to connect
the Dirty interface to the inside, or the Clean interface to the outside with appropriate network security measures
in place, for example.
Server Setup
4
Server Setup
Network Interface Setup Diagram
To Next Page
Loading...
