To Next PageTo Next Page
Need help?Do you have a question about the Cisco c240 and is the answer not in the manual?
General| Product Type | Rack Server |
|---|---|
| Memory | Up to 3TB DDR4 |
| Network Interface | 4 x 1GbE or 2 x 10GbE |
| Storage | Up to 24 x 2.5" or 12 x 3.5" |
| Remote Management | Cisco Integrated Management Controller (CIMC) |
| Operating System Support | VMware, Microsoft, Red Hat |
| Form Factor | 2U Rack |
| RAID Support | RAID 0, 1, 5, 6, 10, 50, 60 |
Describes the target audience for the guide.
Explains document conventions for notes, cautions, and warnings.
Lists related Cisco documentation for further reading.
Provides contact information for submitting feedback.
Outlines procedures for obtaining documentation and submitting service requests.
Provides a detailed overview of the server's external features and ports.
Identifies the physical locations of field-replaceable components within the server.
Presents a summary of the server's key technical features and specifications.
Details the steps for unpacking and inspecting the server upon arrival.
Covers essential preparations before installing the server, including guidelines and requirements.
Provides step-by-step instructions for securely installing the server into a rack using slide rails.
Guides through the initial server setup, including power-on and basic configuration.
Explains network interface card (NIC) modes and redundancy configuration options.
Information regarding the server's system BIOS and Cisco IMC firmware.
Describes the procedures for updating the server's BIOS and Cisco IMC firmware.
Overview of tools for monitoring server health and managing operations.
Explains the function and meaning of server status LEDs and buttons.
Outlines necessary preparations before installing or replacing server components.
General procedures for installing and replacing various server hardware components.
Identifies the locations of all replaceable hardware components within the server.
Procedure for replacing internal or external storage drives.
Steps for removing and installing server fan modules.
Procedure for replacing Dynamic Random Access Memory (DIMM) modules.
Procedure for replacing Central Processing Units (CPUs) and their associated heatsinks.
Steps to replace the Cisco modular RAID controller card.
Procedure for replacing the server's power supply units.
Procedure for replacing the mezzanine LAN-on-motherboard (mLOM) card.
Information and procedures for using the server's service DIP switches.
How to use the BIOS recovery DIP switch for system recovery.
How to use the clear password DIP switch to reset administrator passwords.
How to use the clear CMOS DIP switch to reset BIOS settings.
Details the physical dimensions and weight of the server.
Lists the electrical specifications for the server's power supplies.
Outlines the environmental operating conditions for the server.
Lists the approved power cords and their corresponding plugs for server connection.
Provides visual illustrations of various AC power cords supported by the server.
Lists supported RAID controllers and the necessary cabling for each.
Explains the write-cache policy for the 12G SAS RAID controller.
A matrix detailing RAID controller support across different server versions.
Specific considerations and details for the Cisco UCS SAS 9300-8e HBA.
Guidelines for mixing hard drives and SSDs within RAID groups.
Illustrates and describes cabling paths for RAID controllers.
Information and considerations for the embedded SATA RAID controller.
How to enable the embedded RAID controller via the server's BIOS settings.
Procedures for installing LSI MegaSR drivers for Windows and Linux.
Procedure to restore RAID configuration after replacing a controller.
Provides links to additional resources for RAID information.
Links to integration guides for Cisco UCS Manager.
Release notes specific to Cisco UCS Manager software.
Release notes specific to Cisco C-Series server software.
